|
01 - Aegex10 Carrying Case
-
The Aegex Leather Carry Case has a side carrying handle, an adjustable leather shoulder strap, and a 360° rotating adjustable hand strap on the back. The case has been tested to meet UL913 and IECEx 60079-0 requirements to be used in conjunction with the Aegex10 Intrinsically Safe Tablet.
Contact Rom-Control today to learn more about our range of accessories.
|
|
02 – Aegex10 Docking Station
-
Holds tablet upright at a 60° angle to use tablet like a notebook
-
Enables use of tablet as a desktop with a large external monitor, keyboard and mouse, connected to company Ethernet network
-
Allows quick-charge of the tablet via bottom charging contact pads
-
Allows locking tablet in dock via Kensington Lock feature
-
Features interfaces for typical uses and accessory connectivity including:
-
1x HDMI
-
3 x USB 3.0
-
1 x LAN (RJ45)
-
1 x Power in (Power Supply External 19V/150W)
Contact Rom-Control today to learn more about our range of accessories.
|
|
03 – Passive Stylus Pen
-
Stylus makes it easier to use the touchscreen when wearing gloves. POM tip provides long lifetime with high wear resistance.
-
Material: aluminum barrel with a hard POM tip
-
POM provides long lifetime with high wear resistance
-
Clip with a hole for better security
-
Total length: 119.5mm, barrel diameter: 6.62mm (without clip), tip diameter 4mm
Contact Rom-Control today to learn more about our range of accessories.
|
|
04 – Ex Aegex10 Battery
-
Rechargeable Li-Ion Polymer Battery
-
8700mAh Operating Current
-
Dimensions 168mm x 135mm x 20mm
Contact Rom-Control today to learn more about our range of accessories.
|
|
05 – Universal Docking Station
The Universal Docking Station provides easy connectivity to all your peripherals.
-
2x USB fast charging ports
-
1x Microphone & 1x Headphone jack
Contact Rom-Control today to learn more about our range of accessories.
|
|
06 – Tempered anti-glare protective glass
-
Increase the visibility in bright locations and add extra protection from scratches and marks with the tempered anti-glare protective glass for Aegex tablets
Contact Rom-Control today to learn more about our range of accessories.
|
|
07 – Passive Stylus
Contact Rom-Control today to learn more about our range of accessories.
|
|
08 – Charger / Power Adapter
-
Allow charging for your Aegex tablet with the charger and international power adapters.
Contact Rom-Control today to learn more about our range of accessories.
|
|
09 – Charging Station
-
The charging station allows you to dock your Aegex tablet horizontally to charge while mounted
Contact Rom-Control today to learn more about our range of accessories.
|
|
10 – Explosion Proof Antenna Couplers
This coupler is designed to be used directly with listed explosion proof housings or conduit fittings. An integrated blocking circuit prevents potentially hazardous energy from reaching the antenna in case of radio, modem, or access point failure. It also allows for antenna removal in hazardous areas.
The coupler’s robust design allows for connection to practically any radio and antenna. It is a highly flexible and cost effective solution to hazardous area radio system deployment.
The coupler can also be used as a cable bulkhead.
FEATURES:
-
Short Circuit Protection: Includes integrated blocking circuitry.
-
No Sealing Fitting Required: Fitting is approved for hazardous locations and can be installed with a simple wrench.
-
Environmental Protection: 300 series stainless steel construction and integral potting protects electronics from corrosive environments.
-
Flexibility: Permits a wide variety of passive antennas to be installed in hazardous areas. Antennas may be removed and/or installed with power on. Perfect for a cable bulkhead connection.
-
Approvals: Atex, IECex, UL, cULus, MSHA
Contact Rom-Control today to learn more about our range of accessories.
|
|
11 – Ethernet Barriers
Solexy’s patented (7,057,105) Explosion-Proof / Intrinsically Safe Ethernet Coupler allows for transmissions of Ethernet into hazardous areas with a standard RJ45 connector.
With the Solexy Ethernet coupler it’s possible to connect any standard ethernet devices located in a classified or safe area.
The BXF explosion proof and intrinsically safe barrier is certified for installation in classified areas and BAF intrinsically safe barrier is suitable for installation in safe areas and purged systems.
The BXF is designed to be used with any UL, CSA, MSHA, ATEX or IECEx listed explosion proof housing without the need of a seal fitting, taking up no internal space.
The BAF is designed to be used in safe area directly with any CAT5 or CAT5e cable system. The BAF can also be remote mounted up to 70 meters away with minimal loss of signal. The BAF is also designed to be used with air purge panel systems.
FEATURES
- No Sealing Fitting Required ► Fitting is pre-approved for hazardous locations and can be installed with no potting compounds and a simple wrench. Eliminates the need for costly seal fittings, and reduces the chance of error associated with field installed sealing practices.
- Corrosion Resistant ► 300 series stainless steel of BXF series protects the fitting from corrosive environments, sealing fittings are typically constructed of aluminium or galvanized steel, neither being well suited for the process industry.
- Environmental Protection ► All required circuitry is recessed into fitting and encapsulated against harsh environments; this is impossible with conventional sealing methods.
- Interchangeability ► Ethernet cables can be connected/disconnected without powering down the system, and can be run in traditional cable trays.
- Industrial M12 “D” connection ► With this secure weather proof industrial connection, cable installation and removal can be accomplished without removing power.
Contact Rom-Control today to learn more about our range of accessories.
|
|
12 – Access Point Solutions including WIFI, Bluetooth, Cellular, VHF/UHF
explosion proof WiFi access point are a cost effective multipurpose solution for a wide range of wireless applications in hazardous locations.
Internet connection is easily available and configurable via an internet browser without any need of installing software or drivers for the device.
The WiFi access points are housed in a Solexy WA Corrosion resistant Powder coated Aluminum Enclosure or the WS Electro-Polished AISI 316 (CF8M) stainless Steel enclosure. The Radio transmission is protected through one or more Solexy RX/AX series Ex and intrinsically safe antenna coupler.
OPERATING FUNCTIONS
- WiFi access point (Wifi to LAN)
- WiFi client (LAN to WiFi)
- WiFi Repeater
Contact Rom-Control today to learn more about our range of accessories.
|